News from SAU World

News

Clamping screws

For a correct fixing of the inserts on the tools, SAU recommends using only the tightening screws indicated in the manufacturer’s catalog.

News

Special tools: 3 advantages

For more than 40 years, we have been designing and manufacturing special tools with both mechanical and integral carbide fixings. SAU is a...

News

Tools for sliding headstock machine

SAU enriches the range of tools for sliding headstock machines with new products and inserts intended for processing on small parts.

News

Boring and reaming inserts

SAU launches new XC inserts for boring and roughing holes. Trust those who design quality tools since 1982.

News

SYSTEMS FOR BORING MACHINES

Thanks to the modular boring systems of SAU company, you can work in depth and safety. Discover the new boring heads.

News

Mecspe 2023: a boom in inflows

Mecspe 2023 has just ended. We would like to thank all the participants who came to visit us at our stand.

News

HIGH FEED MILLS - S1503W

Thanks to high-feed milling cutters, the speed of the production process can be increased by 5 times compared to traditional milling.

News

SPECIAL TOOLS

Thanks to the SAU Special Tools, it is possible to carry out several operations on the same piece, without remaking the placement in the machine....

News

BURNISHING TOOLS for threading

Discover the features and advantages of the new SAU burnishing tools, equipped with cooling channels for a more precise thread.

News

DINAPLUS® torque screwdriver | SAU TOOL

You are looking for a torque screwdriver to optimize the clamping of the TORX® and TORX® PLUS footprint inserts? You’re in the right place!

News

What is high feed milling: main features

To increase the processing speed of materials in production processes, we recommend using high-feed milling. Find out more reading this article.

News

Shrink fitting

The shrink fitting is a fastening system that allows to tighten the tools in carbide and super fast steel with a cylindrical shank, for quick, lean...

News

Turning: Which insert should I use?

The choice of the ideal insert for the turning processing passes through the evaluation of some primary and other secondary parameters that are also...

News

Why trochoidal milling?

The trochoidal milling is a processing method that is used by using a radial engagement of the cutter combined with a higher cutting speed. Read more...

News

New “heavy-duty” chuck range

To obtain a coolant flow up to 100 bar you must purchase the chuck with sealing ring. Check all the details reading the article on our website.

News

New thread formers “MSK06007..TG M..”

New generation of thread formers with lubrication ducts, sintered PM steel with high vanadium and cobalt content. Read more on our website.

Stay updated on SAU news

Don't miss any SAU World news: subscribe to our newsletter!